GJ serial tubular stranding machine

They are mainly used to strand the bare copper conductor and the bare alluminium conductor, also using to strand the multicore covered wire.

Configuration:

centre pay-off stand——barrel——die bed——counting mile device——main drive——draw gear——take-up creel stand——electric control and safety protection

Design feature:

1、The structural style of the barrel is that the front and the back arbor use the shoe for supporting, with the riding wheel assisting in the middle. There is much characteristic in the machine, such as good rigidity, high speed and smooth operating.

2、The lapper can be matched when the multicore covered wire is stranded.

designation		unit	GJ200		GJ400		GJ500
			6disk	12disk	6disk	12disk	6disk	12disk
specification of pay-off reel		mm	200		400		500
single-line diameter	copper	mm	Ø0.2~Ø0.85		Ø0.5~Ø2.5		Ø1.5~Ø3.5
	alumin				Ø1.0~Ø2.5		Ø1.5~Ø4.5
	steel		Ø0.2~Ø0.8		Ø0.5~Ø2.0		Ø1.2~Ø3.5
stranding diameter		mm	Ø1.6		Ø3.5		Ø5.0
speed of barrel		rpm	1000	1000	600	500	500	400
outlet external diameter		mm	Ø4.8	Ø8	Ø10	Ø18	Ø15	Ø25
traction wheel		mm	Ø318		Ø1000		Ø1000
outlet speed		m/min	6.09~78.18		14~104		14~104
range of pitch		mm	6~78		28~207		28~207
power of main electric machine		KW	5.5	7.5	18.5		22
draw drum in cage		mm	200		400		500
take-up creel stand		mm	PN400~PN630		PN800~PN1600		PN800~PN1600